Motorcycle
1PZ 7/8" 12V Heated Handlebar Grips for ATV & UTV — 3-Stage Heat
Product description
This kit supplies a pair of 7/8" (22mm) heated handlebar grips designed for use with 12V systems. The grips use a rubber outer sleeve bonded to an internal heating element with insulated wiring to deliver even warmth along the grip surface. They are intended for most ATVs and UTVs with standard 7/8" bars and are listed as compatible with many Harley, Honda, Kawasaki and Yamaha models.
Temperature is managed by an onboard intelligent control chip that offers three selectable settings: low (green LED) at about 40°C, medium (blue LED) at about 50°C, and high (red LED) at about 60°C. Powering on requires pressing and holding the button for three seconds; the red breathing LED indicates startup. The unit will auto-shift to a safe level once target temperature is reached, and single presses cycle through medium, low, and high stages.
Installation is intended to be direct replacement: remove the existing grips and slide these on with no handlebar modification. Wiring uses a standard two-wire connection — red to the positive terminal and black to the negative — so double-check polarity before completing the hookup. The assembly incorporates a 7.5A safety cutout that will open if a fault is detected, protecting the circuit and the grips.
For best results confirm your handlebar diameter (7/8" / 22mm) and vehicle voltage (12V) before purchase. If questions arise about fit or operation, customer support is available for troubleshooting and guidance.
Pros
- Three distinct heat levels with LED indicators
- Simple plug-and-play installation on 7/8" bars
- Built-in 7.5A safety disconnect for protection
Cons
- May feel too warm without gloves on higher setting
- Requires checking wire polarity before connection
- Designed only for standard 7/8" (22mm) handlebars
VerdictThese 7/8" 12V heated grips provide reliable warmth across three clearly defined temperature settings and are straightforward to fit on standard handlebars. The LED color cues and one-button control make adjustments easy on the go, and the built-in 7.5A safety fuse adds peace of mind. Well suited for cold-weather riding and utility tasks when you want heated controls without complex wiring.
Reviews
-
Erin Frost 5/5
Good fit, fast delivery
Installed on my quad with no issues. Rapid shipment and the grips warm up nicely.
-
Keith F 5/5
Works as expected
Installation was straightforward and they heat up quickly. I’ll see how they perform while plowing this winter.
-
in Pa 5/5
Perfect for my TRX 350
Slid right onto my 1986 TRX 350 Honda. Great for snow clearing and a snug fit.
-
PETE 4/5
Solid value for cold weather
For the cost these are impressive. Easy to mount; on high they can be too hot for bare fingers.
Comments
No comments yet.
Sign in or sign up to comment.